Wharfedale PRO DP-4065N, 4-channel PA-Amplifier

AXIOM SW210P-Passive Subwoofer
AXIOM – SW210P, Dual 10″ Subwoofer (Passive)
February 20, 2023
Wharfedale PRO DP-4065
Wharfedale PRO DP-4065, 4-channel PA-Amplifier
February 20, 2023
Wharfedale PRO DP-4065N
Wharfedale PRO DP-4065N
Wharfedale PRO DP-4065N_rear
Wharfedale PRO DP-N-Series

 

Wharfedale PRO DP-4065N, 4-channel PA-Amplifier​ with DSP, FIR and DANTE

[4×650 W (8 Ohms) / 4×1100 W (4 Ohms) / 4×1870 W (2 Ohms) / 2 x 2200 W (8 Ohm Bridged) / 2  x 3740 W (4 Ohm Bridged)]

 

In stock

SKU: 040852 Category:

Wharfedale PRO DP-4065N, 4-channel PA-Amplifier​ with DSP, FIR and DANTE

 

[4x650 W (8 Ohms) / 4x1100 W (4 Ohms) / 4x1870 W (2 Ohms) / 2 x 2200 W (8 Ohm Bridged) / 2  x 3740 W (4 Ohm Bridged)]

Overview

 

DP-4065N 

  • 4 channels
  • 8 Ohm 4 x 650 W
  • 4 Ohm 4 x 1100 W
  • 2 Ohm 4 x 1870 W
  • 16 Ohm Bridged 2 x 1300 W
  • 8 Ohm Bridged 2 x 2200 W
  • 4 Ohm Bridged 2 x 3740 W
  • 100 V Hi-Z : No
  • 70 V Hi-Z 4 x 1100 W

 

DP-N Series

  • Huge Class D power in a 1U rack
  • 4 discrete amplification channels
  • Internal DSP and computer control
  • Stable down to 2 Ω. Drive multiple speakers or line array elements
  • FIR filtering with 512 taps
  • 90 V to 260 V AC working voltage
  • Dante ™ connectivity
  • 70 V compatible

 

TAKE CONTROL

Harnessing the power of the internal DSP

The supplied editing software gives a practical overview of all system parameters and DSP features within the DP-N amplifier.

It is simple to monitor and edit the DP-N remotely.


REDUNDANCY

DP series amps get used in ‘mission critical’ environments.  Therefore the ‘auto’ mode has been built in to deliver redundancy capability.

Set the input to ‘Auto’ and the input will change, should a problem happen with external connections.
(Use of an internal delay is advised to compensate for any switch timing and latency issues)


FIR FILTERS

FIR Filtering gives 

  • Independent control of magnitude and phase. 
  • More detailed equalisation.
  • Optimization of frequency and power response.


STABLE DOWN TO 2 OHMS

Huge output power and stable down to 2 Ohms

The power output figures of DP-N series are staggering.The rated power outputs are measured at THD = 1%, continuous sinusoidal 1 KHz with each channel working simultaneously. 

DP-N amps are also stable down to 2 Ohms. This allows for multiple 8 Ω or 16 Ω speakers to be driven with extreme power.


DANTE ™

Using the Ultimo 4×4 chipset, DP-N amps easily join any Dante ™  ecosystem.

  • Digital audio connectivity of up to 96 KHz 
  • Remote, network control.
Audinate® is a registered trademark of Audinate Pty Ltd.
Dante® is a registered trademark of Audinate Pty Ltd.

Technical Data

 

Model DP-2200NDP-4100NDP-4065NDP-4035N
Rated Power (THD=1%,Each channel works simultaneously with continuous sinusoidal 1 kHz)8 Ω / Stereo2 x 2000 W4 x 1000 W4 x 650 W4 x 350 W
 4 Ω / Stereo2 x 3400 W4 x 1700 W4 x 1100 W4 x 595 W
 2 Ω / Stereo2 x 4760 W4 x 2890 W4 x 1870 W4 x 1010 W
 16 Ω / Bridge1 x 4000 W2 x 2000 W2 x 1300 W2 x 700 W
 8 Ω / Bridge1 x 6800 W2 x 3400 W2 x 2200 W2 x 595 W
 4 Ω / Bridge1 x 9520 W2 x 5780 W2 x 3740 W2 x 2020 W
 100 V Hi-Z2 x 3400 W–––
 70 V Hi-Z2 x 2400 W4 x 1700 W4 x 1100 W–
Output RMS voltage 126.5 V89.4 V72.1 V52.9 V
Maximum Input Level 8.7 Vrms(+21 dBu)(Default Gain)
Default Gain (Rated Power,1 kHz) 24 dB21 dB19 dB17 dB
Gain(Rated Power,1 kHz) 24 dB~42 dB21 dB~39 dB19 dB~37 dB17 dB~35 dB
THD+N Typical value:0.05%(10% Rated Power,8 Ω)
Cross-Talk ≥90 dB(20 Hz-1 kHz,Below Rated Power,8 Ω)
Frequency Response Typical value:+0,-0.5 dB(10% Rated Power,20 Hz-20 kHz,8 Ω)
Input Impedance 20 kΩ(Balance),10 kΩ(Unbalance)
Damping Factor ≥1000(20 Hz-200 Hz,8 Ω)
SNR ≥105 dB (Default Gain, A weighted,20 Hz-20 KHz,8 Ω)
Main Power 90~260 VAC,50/60 Hz
Protection Power under-voltage protection、Amplifier output DC protection、Thermal Protection、 Temperature Power Control、Overload Power Control
Size(W×H×D) 483 x 45 x 376 mm
Net Weight 9.3 kg9.1 kg9.1 kg8.0 kg
Weight 12 kg
Brand

Wharfedale PRO

Related products